Universal & Production Device Programmers, Adapters | Elnec
show-menu
0 items | view cart Elnec online orders

Device: MC68HC11D3

Manufacturer: Freescale Semic.

Part number description for this device:

Move the cursor over the box to highlight particular section
MC Status of Product MC = Fully qualified
XC = Partial qual
PC = Product engineering
68 Numeric Designator (Optional)  
XX Operating Voltage Range HC = HCMOS (Vdd=5.0V +/-10\\%)
L = HCMOS (Vdd=3.0V to 5.5V)
X COP Option (Only On A-series Devices) Blank = COP Disabled
P = COP Enabled
X Memory Type Blank = Masked ROM or No ROM
7 = EPROM/OTP ROM
8 = EEPROM
9 = FLASH
11XXX Base Part Number  
X Monitor Mask None = Blank
B = Buffalo
X Temperature Range Blank = 0°C to 70°C
C = -40°C to 85°C
V = -40°C to 105°C
M = -40°C to 125°C
XX Package Type FN = PLCC
FS = CLCC
FU = QFP64/80
FB = QFP44
PV = TQFP112
PU = TQFP80/100
PB = TQFP52
P = DIP40/48
S = SDIP48
X Maximum Clock Speed 2 = 2.0 MHz
3 = 3.0 MHz
4 = 4.0 MHz
XX Tape & Reel Option Blank = Standard Packaging
R2 = Tape & Reel Packaging

Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.

go back to result page

Supported by programmers and programming adapters/modules:

BeeProg2 adapter/module: programmer must be connected to computer through LPT port
go back to result page
🍪
Back to TOP